REEDS: these are available in a variety of dents (6, 8, 10 and 12 are the most popular but we can also provide 4, 5, 11, 15, 16, 18, 20, 25 and 28 dents for most widths). Choose either carbon steel reeds or the stronger more durable stainless steel reeds (which are rustproof).
Note: that 4, 5, 11, 16, 18, 20 and 25 dent are only available in stainless steel whereas the 28-dent is only available in carbon steel. Additionally 16, 18, 20 (except for 26" and 46") and 25 dent reeds are more expensive. If you are interested in any sizes not listed below (we do not list them all), please call. In determining the length of a reed to buy, understand that the lengths we specify are the approximate weaving widths, not the actual length of the reed, which will be approximately .5 to 1 inch longer. Examine how your reed fits in your beater to determine if total length is critical (normally critical when, in addition to the top and bottom rails, there is some type of vertical support on each end of the beater that restricts total reed length). Different looms handle this in different ways. Don't order the wrong size reed. Provide actual dimensions of your "reed space" with you order if in doubt.
Note regarding height: all reeds are 4 3/4" to 5" high except where noted. Most beaters have adjustments for the bearer rails that allow different heights. If reed height is important for the design of your beater, call us first. We can help.
If you are ordering a dent size other than what we list, select the reed length and type here, but add the dent size under Special Instructions as you complete your ordering information at check-out. The price may be higher than what is shown on this page and we will confirm this with you before we process your order.
|
New note about reeds: our main supplier of reeds is in the process of updating the manner of construction of reeds. New inventory will begin to use a hard plastic cover for the top and bottom rails of the reed; older versions used a tape-like cover. The new reeds will no longer be made with a heavy end support as the new manner of construction eliminates the need. The stated length of the new reeds is still the weaving width but in reality you may be able to weaving 3-6 additional dents, or maybe .5 inches more. We think you will like the new style and they will provide years of service.
|
|
|
|
| Stainless Steel Reeds |
|
|
9.50" Reed $38
LEC-909-4 - 9.50" SS 4-dent
LEC-909-5 - 9.50" SS 5-dent
LEC-909-6 - 9.50" SS 6-dent
LEC-909-8 - 9.50" SS 8-dent
LEC-909-10 - 9.50" SS 10-dent
LEC-909-12 - 9.50" SS 12-dent
LEC-909-15 - 9.50" SS 15-dent
|
|
|
15.75" Reed $38
LEC-916-4 - 15.75" SS 4-dent
LEC-916-5 - 15.75" SS 5-dent
LEC-916-6 - 15.75" SS 6-dent
LEC-916-8 - 15.75" SS 8-dent
LEC-916-10 - 15.75" SS 10-dent
LEC-916-12 - 15.75" SS 12-dent
LEC-916-15 - 15.75" SS 15-dent
|
|
|
22" Reed $53.75
LEC-922-4 - 22" SS 4-dent
LEC-922-5 - 22" SS 5-dent
LEC-922-6 - 22" SS 6-dent
LEC-922-8 - 22" SS 8-dent
LEC-922-10 - 22" SS 10-dent
LEC-922-12 - 22" SS 12-dent
LEC-922-15 - 22" SS 15-dent
|
|
|
24" Reed $54.50
LEC-924-4 - 24" SS 4-dent
LEC-924-5 - 24" SS 5-dent
LEC-924-6 - 24" SS 6-dent
LEC-924-8 - 24" SS 8-dent
LEC-924-10 - 24" SS 10-dent
LEC-924-12 - 24" SS 12-dent
LEC-924-15 - 24" SS 15-dent
|
|
|
26" Reed $63.50
(total length may be about 27")
NOR-926-6 - 26" SS 6-dent
NOR-926-8 - 26" SS 8-dent
NOR-926-10 - 26" SS 10-dent
NOR-926-12 - 26" SS 12-dent
NOR-926-15 - 26" SS 15-dent
JO-926-20 - 26" SS 20-dent (4" high)
|
|
Special Order - 20-dent reed
|
27" Reed $63.50
LEC-927-4 - 27" SS 4-dent
LEC-927-5 - 27" SS 5-dent
LEC-927-6 - 27" SS 6-dent
LEC-927-8 - 27" SS 8-dent
LEC-927-10 - 27" SS 10-dent
LEC-927-12 - 27" SS 12-dent
LEC-927-15 - 27" SS 15-dent
|
|
|
28" Reed $102
JO-927-5 - 27" SS 5-dent
JO-927-6 - 27" SS 6-dent
JO-927-8 - 27" SS 8-dent
JO-927-10 - 27" SS 10-dent
JO-927-12 - 27" SS 12-dent
JO-927-15 - 27" SS 15-dent
|
|
|
|
30" Reed $77.50
(total length may be about 32")
NOR-930-6 - 30" SS 6-dent
NOR-930-8 - 30" SS 8-dent
NOR-930-10 - 30" SS 10-dent
NOR-930-12 - 30" SS 12-dent
NOR-930-15 - 30" SS 15-dent
|
|
|
36" Reed $83.50
LEC-936-4 - 36" SS 4-dent
LEC-936-5 - 36" SS 5-dent
LEC-936-6 - 36" SS 6-dent
LEC-936-8 - 36" SS 8-dent
LEC-936-10 - 36" SS 10-dent
LEC-936-12 - 36" SS 12-dent
LEC-936-15 - 36" SS 15-dent
|
|
|
40" Reed $99
(total length may be about 42.5")
NOR-940-6 - 40" SS 6-dent
NOR-940-8 - 40" SS 8-dent
NOR-940-10 - 40" SS 10-dent
NOR-940-12 - 40" SS 12-dent
NOR-940-15 - 40" SS 15-dent
|
|
|
45" Reed $102
LEC-945-4 - 45" SS 4-dent
LEC-945-5 - 45" SS 5-dent
LEC-945-6 - 45" SS 6-dent
LEC-945-8 - 45" SS 8-dent
LEC-945-10 - 45" SS 10-dent
LEC-945-12 - 45" SS 12-dent
LEC-945-15 - 45" SS 15-dent
|
|
|
46" Reed $120
JO-946-5 - 46" SS 5-dent
JO-946-6 - 46" SS 6-dent
JO-946-8 - 46" SS 8-dent
JO-946-10 - 46" SS 10-dent
JO-946-12 - 46" SS 12-dent
JO-946-15 - 46" SS 15-dent
JO-946-20 - 46" SS 20-dent but 4" high $99
|
|
Special Order - 20-dent reed
|
|
48" Reed $147
JO-948-5 - 48" SS 5-dent
JO-948-6 - 48" SS 6-dent
JO-948-8 - 48" SS 8-dent
JO-948-10 - 48" SS 10-dent
JO-948-12 - 48" SS 12-dent
JO-948-15 - 48" SS 15-dent
|
|
|
50" Reed $117.50
(total length may be about 52")
NOR-950-6 - 50" SS 6-dent
NOR-950-8 - 50" SS 8-dent
NOR-950-10 - 50" SS 10-dent
NOR-950-12 - 50" SS 12-dent
NOR-950-15 - 50" SS 15-dent
|
|
|
60" Reed $131
LEC-960-4 - 60" SS 4-dent
LEC-960-5 - 60" SS 5-dent
LEC-960-6 - 60" SS 6-dent
LEC-960-8 - 60" SS 8-dent
LEC-960-10 - 60" SS 10-dent
LEC-960-12 - 60" SS 12-dent
LEC-960-15 - 60" SS 15-dent
|
|
|
64" Reed $191
JO-964-5 - 64" SS 5-dent
JO-964-6 - 64" SS 6-dent
JO-964-8 - 64" SS 8-dent
JO-964-10 - 64" SS 10-dent
JO-964-12 - 64" SS 12-dent
JO-964-15 - 64" SS 15-dent
|
|
|
|
|
Carbon Steel Reeds
NOTE: carbon reeds may rust, which is the reason most purchases of reeds are for stainless. Because of this, we stock a limited range of carbon reeds, but we can order what you need; please allow 7-14 days when ordering these. Because we do not stock a wide range of carbon reeds, the purchase of this type of reed is treated as a special order.
|
|
|
|
|
|
9.5" Reed $27
LEC-309-6 - 9.5" carbon steel 6-dent
LEC-309-8 - 9.5" carbon steel 8-dent
LEC-309-10 - 9.5" carbon steel 10-dent
LEC-309-12 - 9.5" carbon steel 12-dent
LEC-309-12 - 9.5" carbon steel 12-dent
LEC-309-28 - 9.5" carbon steel 28-dent
|
|
|
15.75" Reed $27
LEC-316-6 - 15.75" carbon steel 6-dent
LEC-316-8 - 15.75" carbon steel 8-dent
LEC-316-10 - 15.75" carbon steel 10-dent
LEC-316-12 - 15.75" carbon steel 12-dent
LEC-316-12 - 15.75" carbon steel 12-dent
LEC-316-28 - 15.75" carbon steel 28-dent
|
|
|
22" Reed $38
LEC-322-6 - 22" carbon steel 6-demt
LEC-322-8 - 22" carbon steel 8-dent
LEC-322-10 - 22" carbon steel 10-dent
LEC-322-12 - 22" carbon steel 12-dent
LEC-322-15 - 22" carbon steel 15-dent
LEC-322-28 - 22" carbon steel 28-dent
|
|
|
24" Reed $39.50
LEC-324-6 - 24" carbon steel 6-dent
LEC-324-8 - 24" carbon steel 8-dent
LEC-324-10 - 24" carbon steel 10-dent
LEC-324-12 - 24" carbon steel 12-dent
LEC-324-15 - 24" carbon steel 15-dent
LEC-324-28 - 24" carbon steel 28-dent
|
|
|
27" Reed $45.50
LEC-327-6 - 27" carbon steel 6-dent
LEC-327-8 - 27" carbon steel 8-dent
LEC-327-10 - 27" carbon steel 10-dent
LEC-327-12 - 27" carbon steel 12-dent
LEC-327-15 - 27" carbon steel 15-dent
LEC-327-28 - 27" carbon steel 28-dent
|
|
|
32" Reed $52.50
LEC-332-6 - 32" carbon steel 6-dent
LEC-332-8 - 32" carbon steel 8-dent
LEC-332-10 - 32" carbon steel 10-dent
LEC-332-12 - 32" carbon steel 12-dent
LEC-332-15 - 32" carbon steel 15-dent
LEC-332-28 - 32" carbon steel 28-dent
|
|
|
36" Reed $54.50
LEC-336-6 - 36" carbon steel 6-dent
LEC-336-8 - 36" carbon steel 8-dent
LEC-336-10 - 36" carbon steel 10-dent
LEC-336-12 - 36" carbon steel 12-dent
LEC-336-15 - 36" carbon steel 15-dent
LEC-336-28 - 36" carbon steel 28-dent
|
|
|
45" Reed $74.50
LEC-345-6 - 45" carbon steel 6-dent
LEC-345-8 - 45" carbon steel 8-dent
LEC-345-10 - 45" carbon steel 10-dent
LEC-345-12 - 45" carbon steel 12-dent
LEC-345-15 - 45" carbon steel 15-dent
LEC-345-28 - 45" carbon steel 28-dent
|
|
|
60" Reed $99
LEC-360-6 - 60" carbon steel 6-dent
LEC-360-8 - 60" carbon steel 8-dent
LEC-360-10 - 60" carbon steel 10-dent
LEC-360-12 - 60" carbon steel 12-dent
LEC-360-15 - 60" carbon steel 15-dent
LEC-360-28 - 60" carbon steel 28-dent
|
|
|
|
NEW! Custom Reeds-Made to Order
If you can't find what your looking for above, The Woolery offers custom made Stainless Steel Reeds. They are available in 4.5", 5", 5.5" and 6" heights and can be made to order at any length up to 95" (240cm).
They can usually be made and shipped in 2-3 business days. The prices are as follows and must be paid for in advance
(No returns or cancellations are accepted):
|
|
Width/Dent Size
|
Width/Dent Size
|
Width/Dent Size
|
|
LENGTH
|
4" - (5, 6, 8, 10, 12, 15)
|
4" - (18, 20, 22.5, 25)
|
5" - (5, 6, 8, 10, 12, 15)
|
| Dent up to 16” |
$40
|
$45
|
$55
|
| Over 16” to 20" |
$50
|
$55
|
$65
|
| Over 20" to 24" |
$55
|
$60
|
$70
|
| Over 24" to 27" |
$60
|
$70
|
$75
|
| Over 27" to 40" |
$80
|
$95
|
$115
|
| Over 40" to 47" |
$100
|
$110
|
$130
|
| Over 47" to 60" |
$115
|
$135
|
$160
|
| Over 60" to 63" |
$125
|
$145
|
$170
|
| Over 63" to 75" |
$150
|
$170
|
$210
|
| Over 75" |
Call
|
Call
|
Call
|
Note: $100 minimum order or an additional handling fee of $10 will be added. Prices do not include shipping & handling (at our normal rates) and orders must be paid in advance. No cancellations or returns are accepted.
INSTRUCTIONS: Please Call, Email or Fax us your Order.
If emailing or faxing, please provide us a daytime phone number so that we can contact you.
MORE CUSTOM REEDS! Custom Reeds-Made to Order
If you can't find what your looking for above, The Woolery offers custom made Stainless Steel Reeds. Now available in 4 1/2”, 5", 5 1/2” and 6” heights and can be made to order at any length AND ANY DENT SIZE INCLUDING HALF SIZES!
Some can be made and shipped within 2-3 business days and some take about a week. The prices are as follows and must be paid for in advance. (No returns or cancellations are accepted):
CARBON REEDS (Not recommended due to possibility of corrosion)
UP TO 20 DPI $1.95 Per Inch - Total Width
OVER 20 DPI $2.05 Per Inch - Total Width
STAINLESS STEEL
UP TO 20 DPI $2.50 Per Inch - Total Width
OVER 20 DPI $2.60 Per Inch - Total Width
Specify Total Reed Height, Total Reed Width, and Dent Size.
EXAMPLE:
17 Dent - 5” Height - 60” Width - Stainless Steel
60 X $2.50 = $150
|
|
|
