Help Selecting A Loom
Selecting a Weaving Loom?
What to consider...
Buying a loom? There are many considerations - what do you want to weave - fabric, rugs, tapestry; how big a piece do you intend to weave; how much space do you have; is this your first loom; what is your level of knowledge and interest; is the loom for you or someone else; price goes up with size and features - how much do you want to spend?
Your first loom could be an inkle loom or a rigid heddle loom. These looms are fairly easy to master, are small (suitable for children) but offer an insight into many aspects of weaving. Regardless of the loom you choose, the width indicates how wide a fabric you will be able to weave; the length can be many yards on floor looms; it is more limited on rigid heddle or table looms.
Perhaps you would like a 4-harness loom as your first loom; the more harnesses (some people call them shafts) a loom has, the more design possibilities it offers. (Some looms have as many as sixteen harnesses).
Among 4-harness looms a table loom is cheaper, can be moved easily, but is hand-operated and therefore much slower than a floor loom; because of its low weight and width, the weaving possibilities are limited. But it is good for beginners, demonstration purposes, samples and workshops. If a first loom, it can be used later for samples, research and small projects.
A floor loom should be your choice if you have enough space. It is heavier and stronger, works much faster than a table loom, offers more possibilities and gives a better shed because of its greater depth. Among floor looms some are light and can be folded (Jack types), others are heavier and take more space. If you plan on weaving mostly rugs a heavy, sturdy loom such as the Glimåkra Standard, Leclerc Nilus II, or the Schacht Cranbrook should be your choice.
Mechanically speaking there are 3 types of looms:
- Jack-type looms work as well for balanced weaving as for unbalanced weaving (1 harness against 3) because each harness frame is operated independently; however the treadling is slightly noisier and harder than on counterbalance looms and, because the tension on the warp cannot be very high, non-elastic warps (linen, nylon) are not recommended on these looms. If you plan on doing a great amount of fabric weaving, a jack loom may suit your work.
- Counterbalance looms are quiet and have a faster and softer treadling than jack-type looms; they allow a high warp tension (important in rug weaving) and elastic warps (wool, cotton) as well as non-elastic warps; the shed is not perfect when weaving is unbalanced but with some looms (Leclerc) the problem is solved by adding a shed regulator.
- Countermarch looms (such as Glimakra's Ideal and Standard, and the Schacht Cranbrook Loom) combine the rising/sinking action of the counterbalance loom with the ability of the jack loom to open any shed, whether balanced or unbalanced. They are quiet, sturdy and the favorite of many highly skilled weavers.
The beater on a loom can either pivot from the bottom or swing from a support above the weaving. Overhead beaters are somewhat easier to work with and are less tiring. The weight of the beater is an important feature as a heavier unit will allow you to beat down more easily.
Beyond the primary components of a loom there are many Weaving Accessories - Weaving Benches, Weaving Reeds, Sectional Warp Beams, Heddles, Shuttles, dobbies (see manufacturers page), bobbin winders and more. A lot to consider. If you are a beginner give us a call or e-mail us and we can consult with you or suggest good weaving books and weaving videos that will provide you with the background to make an informed choice.
Physically, there are several different types of looms that range in size and features:
Floor Loom - Floor looms are best used for producing longer lengths of fabric, for production work, designs that are more complex and for carpets and rugs. The loom must be solid and stable without being excessively heavy. Three different types of floor looms are: Jack, Counterbalance, and Countermarch.
Table Looms - These smaller, less expensive, portable looms are usually jack looms. Sometimes they have springs under the shafts to hold them down. Table looms are good for learning as they are portable enough to put into a car or even on a plane to take to a workshop.
Rigid Heddle - provide the equivalent of two-shaft weaving and can be adapted to behave as a four shaft loom by adding a second heddle set.
Tapestry Frame Loom - The tapestry frame loom is the most simple form for a weaving loom. The Navajo loom would be considered a frame loom.
Back strap loom - A simple loom comprising two sticks between which the warps are stretched. One bar is attached to a fixed object and the other to the weaver usually by means of a strap around the back.
WHAT YOU NEED TO GET STARTED WITH A TABLE OR FLOOR LOOM:
- 2 or more boat or other shuttles
- 12 or more bobbins for boat shuttles
- reed hook and heddle hook
- warping board or mill and raddle (or sectional warp beam, tension box with counter and bobbin rack)
- book ("Learning to Weave” or "The Magic Of Handweaving") and videos ( "Intro to Weaving” and "Beginning 4-harness Weaving” )
Nice to have items - in ranked order:
1. bench, bobbin winder;
2. a variety of shuttles, extra reeds, swift and ballwinder if your yarn comes in skeins, fringe twister, temple;
3. yarn balance, magnifier, Ott light, auto reed hook or more harnesses.
No products have been assigned to this category.